I'm currently doing a spare-parts build to put a media computer in the living room, and having a devil of a time getting my Rosewill RNX-6300 wireless card to connect to my network.
I'm trying to set it up using Windows as opposed to the proprietary Rosewill software -- the Rosewill software is a little over my head.
(I tried TKIP later, when this didn't work, with the same results as described below.) So I set it to WPA-PSK / AES and entered my security key.
It's mixed letters and numbers, 32 characters long. Still "waiting for reply" in the main screen, and "cannot find certificate" on the pop-up.
You can try stepping up encryption to wpa/tkip, wpa-psk/aes, wpa-psk/tkip however the settings must be the same on both your router and your card.If, for any reason, the connection turns to Manual, in order to re-connect, just bring up the available Wireless Network Connection window by double-clicking its icon in the tray bar , select eduroam and click on Connect.In order to configure the connection back to Automatic, edit the eduroam profile, go to the Connection tab and check Connect when this network is in range: Figure 14: Setting Automatic connection  = If the Wireless Network Connection icon is not present, this may be due to the wireless network manager of your vendor's card taking over from Windows' built-in one (Wireless Zero Configuration).I am, as you can tell, far from proficient at this. It's 2.4GHz, WPA2-Personal/AES, and I'm not sure about regular or wide, but in "Mode" it says it takes 802.11n, 802.11g, and 802.11b. This is probably not the enterprsie setup which you have at home.Is there a popup with "Windows was unable to find a certificate to log you on to the network shepherd"? Asking because certificates are used for WAP2 enterprise and not for WPA2 personal. Is there a tick at "Enable IEEE 802.1x authentication for this network"? (Basically that uses a certificate to contact a central authentication server whereas you use a pre shared key).